Dometic Waeco MagicSpeed MS880 Instructions De Montage Et De Service page 106

Masquer les pouces Voir aussi pour Waeco MagicSpeed MS880:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 114
Using MagicSpeed
Press the SET button continuously to accelerate the vehicle.
When you let go of the SET button, the cruise control records the current
speed and saves it.
RES button
Press the RES button to recall the last saved speed when:
you have switched on the cruise control using the ON/OFF button,
you do not apply the brake or clutch pedal,
you do not switch off the ignition in the meantime,
the vehicle does not slow down to below the lower activation speed,
the current speed is not less than 50 % of the saved value.
Press the RES button and let go again immediately to recall the last saved
speed.
Accelerating and decelerating
If the cruise control is activated, you have the option of fine tuning it.
This allows you to adapt the speed of the vehicle precisely to suit traffic
conditions or speed limits.
Touch the SET button to increase the speed by 1.5 km/h.
Press the SET button for 1 second to increase the speed by 10 km/h.
Touch the RES button to decrease the speed by 1.5 km/h.
Press the RES button for 1 second to reduce the speed by 10 km/h.
If, for example, you wish to increase the speed by around 5 km/h, touch the
SET button three times.
NOTE
I
If you wish to decrease the set speed sharply, do not use the RES
button.
Use the ON/OFF button, the brake or the clutch and then press the
SET button to set the speed you prefer.
106
MagicSpeed MS880
EN

Publicité

Table des Matières
loading

Table des Matières