Automatic Dispensing Of Hot Water (Sae - Display) - Astoria AL Manuel D'utilisation Et D'entretien

Automatic dispensing of hot water
6.10
(SAE - DISPLAY versions)
PROGRAMMING
The machine is programmed by
default. Should the hot water doses
have to be modified, proceed as fol-
lows:
• Place the jug under the hot water
nozzle;
• press button for at least 5
PROG.
STOP
seconds until all leds of the dose
buttons are lit;
• press the hot water button
• to confirm the dose, press again
button ;
• on concluding the programming,
press button until all leds
PROG.
STOP
of the push-button panel are
switched off.
USER manual
DISPENSING OF HOT WATER
• Place the jug under the hot water
• press water button
PROG.
STOP
• to block the dispensing in advance,
;
Avoid contact with the hot water nozzle, do not direct your hands
or other body parts towards the hot water nozzle ends.
PROG.
STOP
nozzle;
and wait
for the dispensing of hot water;
press the hot water dispensing
button or press button .
PROG.
STOP
PROG.
STOP
59 260
of