Programming Of Machine Parameters (Display) - Astoria AL Manuel D'utilisation Et D'entretien

Programming of machine parameters
6.14
(DISPLAY version)
6.14.1 Access to menu
• To access the programming menu, press and keep
pressed button (MODE) for at least 3 seconds;
• to scroll the various areas of the programming menu,
use button (MODE);
• To switch from one parameter to another within the
same area, use button (ENTER);
• to modify the value of every parameter, use the two
buttons ( + ) increase and ( - ) decrease.
Mode Increases
( + )
Enter Decreases
Mode Increases
( + )
Enter Decreases
The system quits automatically the programming stage after
approx. 20 seconds from the last operation carried out.
For programming, always use the right-hand push-button panel.
USER manual
PROG.
STOP
Stop
Programm.
( - )
PROG.
STOP
Stop
Programm.
( - )
1.0 BAR 120°C P
09:16 09-10-12 5
(MODE ) x 3 sec.
CLOCK SETUP
09:16 18-10-12 1
(MODE ).
AUTO ON/OFF
ON 08:00
(MODE ).
AUTO ON/OFF
OFF 23:00
(MODE )
DAYS WORKED
1234567
(MODE )
REG. SOFTENER
00000
(MODE )
LITRES COUNTER
LIT.= NNNNN
(MODE )
LANGUAGE
ENGLISH
(MODE )
CUP WARMER
80°C
(MODE )
AUTOSTEAMER
65 °C
(MODE )
DOSER UNITS ALARM
000 000 000 000
63 260
of