Astoria AL Manuel D'utilisation Et D'entretien page 65

6.14.7 Display and zeroing of the litres counter
To display the litres counter and for zeroing:
• Enter programming until the litres count is displayed;
• To perform the zero-
ing press button ( - );
• To confirm the zero-
ing press, and keep
pressed, button ( + )
for 3 seconds;
• To switch to the next
programming press
button (MODE)
6.14.8 Programming Boiler Pressure
Service not active
6.14.9 Programming of Language
Programming of the language displayed:
• Enter programming
until the following
appears on the dis-
play;
• Set new language by means of buttons ( + ) and ( - );
• To move to the next programming, press button
(MODE).
For English, the option is foreseen to choose between Celsius (°C)
and Fahrenheit (°F) for the degrees.
USER manual
LITRES COUNTER
LIT. = NNNNN
ZEROING COUNTS?
PRESS + 3 SEC.
LITRES ZEROED
LANGUAGE
ENGLISH
6.14.10 Programming Cup warmer
Programming temperature and activation of the cup
warmer:
• Enter programming
until the following ap-
pears on the display;
• Set the temperature (70-100°C) by means of buttons
( + ) and ( - );
• To move to the next programming, press button
(MODE).
6.14.11 Programming Autosteamer Temperature
Programming the autosteamer intervention tem-
perature:
• Enter programming
until the following ap-
pears on the display;
• Set the temperature by means of buttons ( + ) and ( - );
• To move to the next programming, press button
(MODE).
The actual temperature of the beverage may differ by a few
degrees from the set temperature depending on the amount of
the beverage heated.
6.14.12 Doser Units alarm
Control of the dosers alarm. The following diagram
provides the correspondence with the dispensing units.
DOSER UNITS ALARM
000 000
CUP WARMER
80°C
AUTOSTEAMER
65 °C
000 000
65 260
of