Dispensing With Autosteamer; Adjusting The Temperature - Astoria AL Manuel D'utilisation Et D'entretien

Dispensing with Autosteamer

6.11
6.11.1 Dispensing
• Immerse the terminals of
the autosteamer spout
(24) in the milk;
• press button
Autosteamer
• wait until the delivery is finished;
• to block the dispensing in ad-
vance press the same button
.
Autosteamer
Avoid contact with the steam nozzles, do not direct your hands or
other body parts towards the steam nozzle ends.
Keep the tips clean at all times using a cloth dampened in
lukewarm water. The milk can be kept in the refrigerator for a
maximum of 3-4 days.
60 260
of
24
(23);
Autosteamer

6.11.2 Adjusting the temperature

To adjust the temperature of the autosteamer inter-
vention, proceed as follows:
• Press and keep pressed button
of the right-hand push-but-
PROG.
STOP
ton panel for at least 5 seconds;
• press button
until the following message will
be displayed:
AUTOSTEAMER
23
65 °C
• by means of buttons (+) and
(-) modify the autosteamer's
temperature displayed;
Increases
( + )
Increases
( + )
• to confirm the operation, press
button ;
PROG.
STOP
• To exit the programming mode,
press the key
repeatedly
PROG.
STOP
Decreases
( - )
Decreases
( - )
PROG.
STOP
PROG.
STOP
PROG.
STOP
PROG.
STOP
PROG.
STOP
PROG.
STOP
USER manual