Sae Version; Coffee Delivery; Coffee Dose Programming - Astoria GLORIA AL Mode D'emploi

6.3 SAE version

COFFEE DELIVERY

• put the coffee cup under the dispensing spout;
• press the desired dose key and wait for coffee to be delivered
comes on);
• to stop delivery of coffee in advance, press the delivery key again or
press the key STOP;
• in the event of anomalies or if the push button panel is locked, use the
manual delivery switch.

COFFEE DOSE PROGRAMMING

• Turn the programming key (A) to the ON position;
• Hold the STOP/PROG
the push button panel
• Press the dose key to be programmed (e.g. 1 espresso coffee
• Wait for dispensing. To confirm the dose press the dose key
the STOP/PROG key
• Repeat this operation for the other dose keys.
• Upon conclusion of the programme, press the key STOP/PROG
until all LEDs go off on the push button panel, and turn the
programming key to OFF.
For models with 2-3-4 groups it is possible to program simultaneously all
machine push button panels using only the right push button panel. It is
however advisable to check the programming of the other push button
panels.
16
AL - AEP - SAE
key down for 5 seconds: all LED on
come on;
again.
(LED
);
or
g
r o
g
o
r
A