Adjustment - Astoria GLORIA AL Mode D'emploi

C
9.
up heater
9.1 Use
1) Place the cups to be heated on the appropriate surface;
2) Place the cup heater switch in the ON position.
i
For safety reasons it is advisable not to place cloths or other objects on the cup heater surface to keep
the machine from overheating.

9.2 Adjustment

To activate, de-activate or adjust the cup heater, place the cup heater switch located above the
machine on switch in the ON position and proceed as follows:
• Turn the programming key to the OFF position;
• Keep the PROG
• Repeatedly press the PROG
• Use the keys
steamer shown on the display;
• keep the PROG key
• To exit programming, press the PROG key
ming if no selections are made for at least 10 seconds)
i
To deactivate the cup heater set a temperature lower than 70°C (the display shows ---- ) or turn the
heater switch on OFF (placed above the turn on machine switch).
button pressed for at least 5 seconds;
key until the display shows the message
on the left push button panel to modify the temperature of the auto-
pressed to confirm the operation.
(the machine automatically exits program-
cup heater
80°c
37
DISPLAY - ASD / DS