Astoria GLORIA AL Mode D'emploi page 175

10.1 Programming of CLOCK and DATE
Change of hour, date and day of :
1) Hold down the key MODE
2) use the keys
3) Press the ENTER key
4) Press the MODE key
10.2 START-UP programming
Programming of the automatic switching on of the machine:
1) set the machine switching on time with the keys
2) press the ENTER key
3) press the MODE key
10,3 SHUT DOWN programming
Programming of the automatic switching off of the machine:
1) set the machine shut down time with the keys
2) press the ENTER key
3) press the MODE key
10.4 REST DAY programming
To program machine shutdown for rest day(s), follow the instructions below:
1 - Monday
2 - Tuesday
Days
3 - Wednesday
of the
4 - Thursday
week
5 - Friday
6 - Saturday
7 - Sunday
Shutdown
1) Choose the day(s) for shutdown by scrolling with the keys
2) Use the key ENTER
shutdown.
Switching ON
To eliminate machine shutdown, use the ENTER key
value of the day.
i
Also activate the ON and OFF times, see paragraphs 10.2 and 10.3
of the right hand push button panel for 3 seconds;
to change the parameter during the flashing phase;
to move on to the next parameter;
to move on to the next programming.
to pass from hours to minutes and vice versa;
to pass on to the next programming.
to move from hours to minutes and vice versa;
to move on to the next programming.
-
to set the dash " " at the day(s) of desired
;
;
to reset the numerical
clock set-up
09:16 08-09-03 1
auto on/off
on 08:50
auto on/off
off 18:30
Example of machine shutdown
on Tuesday and Thursday
working days
1 - 3 - 5 6 7
Example of machine with no
days set for shutdown
working days
1 2 3 4 5 6 7
27
SAE - DISPLAY