Astoria GLORIA AL Mode D'emploi page 174

C
9. up heater
To activate, deactivate or adjust the cup heater, turn the cup heater switch
switch to ON (with the programming key on OFF) and proceed as follows:
• Hold down the key PROG
• Press again the PROG switch
• Use the increase (+)
of the cup heater shown on the display;
• keep the PROG key
i
To deactivate the cup heater set a temperature lower than 70°C (the display shows ---- ) or turn the
heater switch on OFF (placed above the machine start switch).
P
10. rogamming of machine parameters
Turn the programming key
Keep the MODE key
3 seconds to have access to programming.
Use the MODE key of the right hand push button panel
various areas of the programming menu.
Use the ENTER key of the right hand push button panel
a parameter to the next one within the same area.
To modify the value of each parameter, use the
keys of the right hand push button panel
The system automatically exits the programming phase a few
i
seconds after the last operation carried out. When programming
is finished, turn the programming key back on OFF.
The programming of the electronic push button panel can be car-
ried out only when the programming switch is on ON.
26
SAE - DISPLAY
of the right hand push button panel for 5 seconds;
displaying the message
and decrease ( - )
pressed to confirm the operation.
o g
r
g
r o
P
to ON (
(3) flashes on the display).
of the right push button panel pressed for at least
keys of the right push button panel to modify the temperature
3
to scroll the
to move from
increase and decrease
placed above the turn on machine
cup heater
80°C
1.0 bar
09:16 09-02-04 1
clock set-up
09:16 18-02-05 1
auto on/off
on 08:50
auto on/off
off 18:50
working days
1 2 3 4 5 6 7
reg. softener
00000000
boiler pressure
0.0 bar is=0.0
cup heater
80°c
language
English
doser alarm
000 000 000
120°C P