Connections, switches and system add-ons
TransTig / Magic-
Wave 1700 / 2200
Fig.5
(16) MagicWave: welding torch connection socket ... for connecting
(17) MagicWave: grounding (earthing) cable connection socket ... for connecting
(18) LocalNet connection socket ... standardised connection socket for system add-
(19) Torch control connection socket ... for connecting the control plug of a conventio-
(20) Mains switch ... for switching the power source on and off
(21) Mains cable with strain relief device
(22) Shielding gas connection socket
Front view
(18) (19)
(17)
(16)
Connections and switches on MagicWave 2200 power source (as example)
-
the TIG welding torch
-
the electrode cable for rod electrode (MMA) welding
TransTig: (-) - Current socket with bayonet latch ... for connecting
-
the TIG welding torch
-
the electrode (or grounding/earthing) cable in rod electrode (MMA) welding,
depending on the type of electrode being used
-
the grounding (earthing) cable
TransTig: (+) - Current socket with bayonet latch ... for connecting
-
the grounding (earthing) cable when TIG welding
-
the electrode (or grounding/earthing) cable in rod electrode (MMA) welding,
depending on the type of electrode being used
ons (e.g. remote control, JobMaster TIG torch, etc.)
nal welding torch
16
Rear view
(22)
(20)
(21)