Minimum equipment needed for welding
General remarks
Depending on which weld process you intend to use, a certain minimum level of equip-
ment will be needed in order to work with the power source.
In the section below, you will find lists of what equipment is needed (as a minimum) for
welding with each of the weld processes.
TIG-AC welding
-
-
-
-
-
TIG-DC welding
-
-
-
-
-
Rod electrode
-
(MMA) welding
-
-
-
MagicWave power source
Grounding (earthing) cable
TIG welding torch with rocker switch
Gas connection (for supplying the machine with shielding gas), with pressure
regulator
Filler metal (depending on the application)
TransTig or MagicWave power source
Grounding (earthing) cable
TIG welding torch with rocker switch
Gas connection (for supplying the machine with shielding gas)
Filler metal (depending on the application)
TransTig or MagicWave power source
Grounding (earthing) cable
Electrode holders
Rod electrodes (as required by the application)
6