Special Functions; Displaying The Software Version; Operating Time Display - Fronius TransTig 2200 Instructions De Service

Special functions

Displaying the Display software version:
software version
While pressing and holding the "Mode" button (1), press the parameter selection button
(7). The software version now appears on the displays. To exit, press the Mode button
(1) again.
Display operating time:
Operating time
display
1.
2.
Important! The operating time display is not suitable as a basis for calculating hiring
fees, warranty purposes, etc.
To exit, press the Mode selection button again.
(1)
While pressing and holding the „Mode" button (1), press the parameter selection
button (7).
+
(1)
Press the parameter selection button (7) again.
(7)
This registers the actual arc burning time since the initial start-up.
Example: „654 | 32.1" = 65,432.1 h = 65,432 h | 6 min
+
(7)
(7)
42