Transtig 4000 / 5000 - Fronius TransTig 2200 Instructions De Service

TransTig 4000 /
5000
Fig.5c Power source connections and switches on TransTig 5000 (as example)
(54) (-) - Current socket with bayonet latch ... for connecting
(55) (+) - Current socket with bayonet latch ... for connecting
(56) LocalNet connection socket ... standardised connection socket for system add-
(57) Torch control connection socket ... for connecting the control plug of a conventio-
(58) Mains switch ... for switching the power source on and off
(59) Blanking covers (intended for LocalNet connection socket)
(60) Mains cable with strain relief device
(61) Shielding gas connection socket
Front view
(55)
- the TIG welding torch
- the electrode (or grounding/earthing) cable in rod electrode (MMA) welding,
depending on the type of electrode being used
- the grounding (earthing) cable when TIG welding
- the electrode (or grounding/earthing) cable in rod electrode (MMA) welding,
depending on the type of electrode being used
ons (e.g. remote control, JobMaster TIG torch, etc.)
nal welding torch
(56)
(59)
(57)
(54)
18
Rear view
(58) (61)
(59)
(60)