Control Panel; Overview - Fronius TransTig 2200 Instructions De Service

Control panel

Overview

The key feature of the control panel is the logical way in which the controls are arranged.
All the main parameters needed for day-to-day working can easily be
-
-
-
The illustration below shows an overview of the main settings needed for day-to-day
working, using the MagicWave control panel as an example. You will find a detailed
description of these settings in the following section ("Control panel").
selected with the buttons
altered with the adjusting dial
shown on the display during welding.
Note! Owing to software updates, you may find that your machine has certain
functions that are not described in these Operating Instructions, or vice-versa.
Also, certain illustrations may be slightly different from the actual controls on
your machine. However, these controls function in exactly the same way.
3. Select the parameter:
Starting current I
Main current I
1
Downslope t
down
Final current I
E
Balance (only with TIG-AC)
Electrode diameter
4. Alter the parameter
S
8
2. Choose which process:
(only with MagicWave)
AC welding
AC + cap-shaping
(only with TIG)
DC- welding
DC+ welding
(only with rod electrode)
1. Select the operating mode:
2-step mode
4-step mode
Rod electrode (MMA)