Settings For The Preparation Of Coffee - Unold 28811 Notice D'utilisation

settings for the PreParation of coffee

cup sizes
small cup/espresso cup
medium cup/standard size
big cup/coffee mug
The coffee outlet is height adjustable and can be adapted to the
size of the cup. Move the lower part of the outlet up or down, as
required.
one cup of coffee:
Place the corresponding cup under the coffee outlet.
As soon as the display of the automatic coffee machine indicates
BETRIEBSBEREIT
press the button for the desired cup size.
The coffee will be brewed and poured into the cup.
two cups of coffee:
Place two coffee cups under the outlet nozzles so that each of
them is under a nozzle. The proceeding is identical to the one
described for the preparation of one cup. Nevertheless, it is
necessary to press one of these buttons
twice within 2 seconds. The display indicates:
ZWEI TASSEN
KAFFEE
The automatic coffee machine automatically prepares two cups of
coffee of the corresponding size.
Note:
If the feature voRMahleN/PRE-GRIND is selected, only one cup
can be prepared at a time.
Preparation of hot water
The temperature of the hot water in the brewer assembly is of
more than 95 °C, being of more than 85 °C in the outlet.
The following message must be displayed in order to prepare hot
water:
BETRIEBSBEREIT
Place a jug (cup or similar) under the steam nozzle and turn the
steam control to eIN [ON]. The display indicates:
HEISSWASSER
BEREIT
The hot water is poured directly from the steam nozzle into the
jug.
If you want to interrupt the process, turn the steam control to aUs
[OFF]. The automatic coffee machine stops producing hot water
and the display indicates:
BETRIEBSBEREIT
the frother becomes very hot when discharging hot water. Please do
not touch the frother immediately after discharging hot water. Please
use the rubber handle.
24
steam function / Milk froth function
Make sure that the following message is displayed:
BETRIEBSBEREIT
Then press the button MeNÜ/MENU once. The appliance starts
the heating process. The display indicates:
AUFWäRMEN
After approximately 120 seconds the appliance has been heated
up and the following message is displayed:
DAMPF
BEREIT
Place the jug with the liquid to be heated / frothed under the
frother.
Then turn the steam control to eIN [ON]. The nozzle discharges
hot steam.
DAMPF
To froth milk, fill one third of the jug with milk. Immerse the
steam nozzle in the milk and turn the steam control to eIN [ON].
As soon as the milk is sufficiently frothed, turn the steam control
to aUs [OFF].
caUtIoN:
hot water and steam can cause scalding! always direct
the frother either into a jug or towards the drip tray.
If no steam is discharged, the nozzle might be clogged.
turn the steam control to aUs [oFF/o] and switch the
appliance off. clean the steam nozzle with a needle.
Finalise the preparation of steam
When the display indicates
DAMPF
BEREIT
(STEAM READy) press the button MeNÜ/MENU once. The
following message is displayed:
WASSER
ABLASSEN
Place a jug under the frother. Now turn the steam control to eIN
[ON]. The automatic coffee machine discharges a small amount
of water to automatically reduce the temperature. As soon as the
following message is displayed
BETRIEBSBEREIT
(READy), turn the steam control to aUs [OF]. The automatic
coffee machine returns to standby mode. If you do not turn the
steam control to aUs [OFF] , the appliance switches to the hot
water feature.
caUtIoN:
During operation never open the lateral cover or interrupt
the power supply and do not remove the water tank or
the drip grid.