Prior To Preparing Coffee For The First Time - Unold 28736 Notice D'utilisation

repairs can result in serious hazards for the user and
void the warranty.
31. If the power cord of this appliance is damaged, it
must be replaced by the manufacturer or by the man-
ufacturer's customer service organisation, or by a per-
son with similar qualifications, to prevent hazards.
CAUTION:
The appliance becomes very hot during operation
and maintains the heat during some time after
disconnection.
Never open the housing of the appliance. This can result
in electric shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

PRIOR TO PREPARING COFFEE FOR THE FIRST TIME

Before brewing coffee for the first time, please run one or two brewing cycles
with water only, to remove any residue from the manufacturing process. We also
recommend running one brewing cycle without coffee if the appliance has not
been in use for an extended period.
1. Remove all packaging materials and any transport safeguards. Keep
packaging materials away from children – danger of suffocation!
1. Clean the glass pot (9), the permanent filter (1) and the filter holder (2), as
described in the chapter, "Cleaning and Care".
2. Wipe off the exterior of the appliance with a damp cloth.
3. Fill the water tank (5) to the MAX marking/12 cups with tap water. Ensure
that there are no beans in the bean container (4).
4. Close the lid of the glass pot and place it on the warming plate (8).
5. Plug the power cord into an electrical outlet (220–240 V~, 50 Hz)
6. Caution: All operating entries via the buttons will only be saved as long as
the display is illuminated blue. As soon as the display light goes out, you
must first press a button before additional button entries are possible.
24
Copyright UNOLD AG | www.unold.de