Prior To Preparing Coffee For The First Time - Unold 28736 Manuel D'utilisation

Masquer les pouces Voir aussi pour 28736:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
23. In case of repeated use,
allow the appliance to cool
off at least 5 minutes before
next use.
24. Never use the coffee pot in
the microwave; it is not sui-
table for such use.
25. Do not move the appliance
as long as it is in operation,
to prevent injuries.
26. Ensure that all users, espe-
cially children, are aware of
the danger of injury from
escaping steam and hot
splashing water – danger of
burns!
27. To avoid damage, do not use
the appliance with accesso-
ries of other manufacturers
or brands.
28. Unplug the mains plug from
the electrical outlet after use
and before cleaning. Never
leave the appliance unatten-
CAUTION:
The appliance becomes very hot during operation!
Never open the housing of the appliance. This can result in elec-
tric shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or
incorrect use or if repairs are carried out by unauthorized third parties.

PRIOR TO PREPARING COFFEE FOR THE FIRST TIME

Before brewing coffee for the first time, please run one or two brewing cycles
with water only, to remove any residue from the manufacturing process. We also
recommend running one brewing cycle without coffee if the appliance has not
been in use for an extended period.
1.
Remove all packaging materials
and transport safeguards.
2.
Clean the glass pot (9), the per-
manent filter (1) and the filter
22
ded when the mains plug is
plugged in.
29. Check the appliance, the
plug and the power cord
regularly for wear or damage.
In the event of damage to the
power cord or other parts,
please send the appliance or
the power cord to our custo-
mer service organisation for
inspection and repair. Unau-
thorised repairs can result in
serious hazards for the user
and void the warranty.
30. If the power cord of this
appliance is damaged, it
must be replaced by the
manufacturer
manufacturer's
service organisation, or by a
person with similar qualifi-
cations, to prevent hazards.
holder (2), as described in the
chapter, "Cleaning and Care".
3.
Wipe off the exterior of the appli-
ance with a damp cloth.
or
by
the
customer

Publicité

Table des Matières
loading

Table des Matières