Cleaning And Care; Descaling - Unold 28736 Manuel D'utilisation

Masquer les pouces Voir aussi pour 28736:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
filter within 30 seconds, so that
the filter does not overflow.
8.
When the appliance is finished
brewing coffee, this is indicated
by a signal tone.
9.
The warming plate remains swit-
ched on as long as the coffee-
maker is switched on, in order
to keep the coffee remaining in
the pot warm. After 35 minutes
the appliance automatically swit-

CLEANING AND CARE

Before cleaning, always turn
off the appliance and unplug it
from the electrical outlet.
Allow the appliance to cool
before cleaning it.
1.
the supply cable may not be
immersed in water or any other
liquid or cleaned in the dish-
washer.
2.
Open the swivel arm of the appli-
ance and remove the perma-
nent filter. Dispose of the coffee
grounds.
3.
Condensation can collect above
the filter. After brewing coffee,

DESCALING

1.
Regular descaling maintains the
efficiency of your coffee machine,
increases its service life and redu-
ces the energy consumption.
2.
Use commercial descaling pro-
ducts following the corresponding
instructions for use.
3.
Fill the water tank with descaling
solution up to the MAX mark.
The appliance and
ches off. If you do not want the
warming function, switch off the
appliance with the „EIN/AUS"
("ON/OFF") button.
10. After pouring out all of the coffee
and emptying the pot completely,
do not place the empty coffee pot
on the hot warming plate.
11. Remove the permanent filter and
dispose of the coffee grounds.
wipe off the bottom of the lid with
a dry cloth.
4.
Wipe off the housing and the war-
ming plate with a damp cloth and
a little dishwashing detergent.
Do not use any abrasive scou-
ring agents, steel wool, metal-
lic objects, disinfectants or hot
cleaning agents, since they can
damage the appliance.
5.
Clean the glass pot, its lid, the fil-
ter holder and filter in water with
a little dishwashing detergent
added.
6.
The appliance must be comple-
tely dry before you use it again.
4.
Alternatively, you may use citric
acid. Add 25 to 50 g of citric acid
to one litre of water.
5.
Put the coffee jug on the tempe-
rature maintenance plate.
6.
Push the button „EIN/AUS" and
the approximately one third of the
water run through.
27

Publicité

Table des Matières
loading

Table des Matières