Menu Settings - Unold 28811 Notice D'utilisation

menu settings

The setting of the appliance may be changed when the following
message is displayed:
BETRIEBSBEREIT
To activate the menu, press the MeNÜ/MENU button until the
message on the display changes.
If no button is pressed during approx. 5 seconds when being in
programming mode, the programming mode is abandoned without
saving the changes made.
The first submenu indicated on the display is the water hardness
adjustment:
ENTKALKEN
500
Within the submenu you may select the different options by
pressing the button
Pressing the MeNÜ/MENU button once briefly, you will access the
corresponding next submenu.
Pressing the MeNÜ/MENU button for three seconds, the
settings made will be saved immediately and the menu will be
abandoned.
Note:
If you press the MeNÜ/MENU button briefly at the end of the
last submenu (Automatic descaling), you will return to the main
menu. Any changes made will not be saved.
you will find a schematic diagram on page 92.
Water hardness
To activate the menu, press the MeNÜ/MENU button until the
message on the display changes.
Drinking water hardness changes depending on the region.
your local municipal water supplier provides information on the
hardness of your water. The proper water hardness should be set, in
order to allow the appliance to adjust the descaling programme to
the local water hardness. The right settings prevent the appliance
from being damaged and ameliorate your coffee.
As a basic rule for descaling, the following applies: The higher the
hardness, the earlier descaling has to be carried out.
Example: Hardness 1 – Entkalken/Descaling 2000
Hardness 4 – Entkalken/Descaling 500
Opening the menu, the following message is automatically
displayed:
ENTKALKEN
500
The descaling programme will be initialised after brewing 500 cups
of coffee.
Press the button once.
ENTKALKEN
1000
The descaling programme will be initialised after brewing
1,000 cups of coffee.
Press the button again.
26
ENTKALKEN
1500
The descaling programme will be initialised after brewing
1,500 cups of coffee.
Press the button again.
ENTKALKEN
2000
The descaling programme will be initialised after brewing
2,000 cups of coffee.
When the set total number of cups is reached, the following
message will be displayed:
GERäT ENTKALKEN
(DESCALE APPLIANCE). Please follow the instructions described
in the chapter DESCALING.
If you do not want to descale the appliance, switch it off for a
short time. After reconnecting, the appliance returns to standby
mode and the following message is displayed:
BETRIEBSBEREIT
To save your changes, press the MeNÜ/MENU button until the
display changes, thus abandoning the menu.
To programme further changes, press the MeNÜ/MENU button
once briefly, in order to access the next option.
activation of the warming plate
This option connects or disconnects the warming plate for cups.
The default setting is aUs [OFF].
To activate the menu, press the MeNÜ/MENU button until the
message on the display changes.
Press the MeNÜ/MENU button once. The following message is
displayed:
WäRMEPLATTE
AUS
The warming function is now deactivated. Press the button
once, in order to activate the warming plate. The following
message is displayed:
WäRMEPLATTE
EIN
To save your changes, press the MeNÜ/MENU button until the
display changes, thus abandoning the menu.
To programme further changes, press the MeNÜ/MENU button
once briefly, in order to access the next option.