Télécharger Imprimer la page

Environmental Conditions; Materials; Operating Forces Of Controls - Invacare Birdie EVO Manuel D'utilisation

Masquer les pouces Voir aussi pour Birdie EVO:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 103
Type B Applied Part
Sound level
Working ability
Intermittent (periodic motor operation)
Battery specifications
Battery type
Manual emergency lowering
Electric emergency lowering / lifting
Power Consumption
Lifting Speed - without load
Lifting Speed - with 80 kg person
*IPx4 - The system is protected against water splashed from any direction.

11.4 Environmental conditions

Storage and
transportation
Temperature
-10 °C to +50 °C
Relative humidity
20% to 90% at 30 °C, not condensing
Atmospheric
pressure
Allow the product to reach operation temperature
before usage:
Warming up from minimum storage temperature
might take more than 30 minutes.
Cooling down from maximum storage
temperature might take more than 5 minutes.

11.5 Materials

Component
Base, legs, mast and boom
Spreader bar
1650023-F
Operation
+5 °C to +40 °C
800 hPa to 1060 hPa
Material
Steel, powder-coated
Steel, powder-coated and
TPU
Birdie® EVO
Birdie® EVO
Applied part complying with the specified requirements for
protection against electrical shock according to IEC60601-1.
45 – 50 dB(A)
40 full lifts (with battery between 100% – 50% of full capacity)
10%, max. 2 min/18 min
2 x 12 V / 2.9 Ah
Lead acid (service free, sealed)
Yes
(at bottom of
(at top of actuator)
actuator)
Yes / Yes (for CBJ1
and CBJ Care)
Yes / No (for CBJ2
Yes / No (for CBJ2
and CBJ Home)
and CBJ Home)
while charging: max. 19 W
in standby: max. 2.5 W
35 mm/s
30 mm/s
Component
Actuator housing, hand
control, mast protector,
castors and other plastic
parts
Boom connector, bolts and
nuts
All components of the product are either corrosion resistant
or corrosion protected.

11.6 Operating forces of controls

Control
Buttons on control unit
Buttons on hand control
Foot pedal*
Leg spreader lever on Birdie® EVO
/ Birdie® EVO COMPACT
Leg spreader lever on Birdie® EVO
XPLUS
* A leg spreader lever is mandatory for Birdie® EVO equipped
with 75 mm castors and for Birdie® EVO XPLUS with manual
leg spreader.
Birdie® EVO
COMPACT
PLUS / XPLUS
Yes
Optional
(at bottom of
actuator)
Yes / Yes (CBJ1
and CBJ Care)
Yes / No (CBJ Home)
28 mm/s
47 mm/s
23 mm/s
40 mm/s
Material
Material according to
marking (PA, PP, PE)
Steel, zinc-plated
Operating force
4 N
4 N
max. 290 N
max. 50 N
max. 95 N
Technical Data
31

Publicité

loading

Ce manuel est également adapté pour:

Birdie evo compactBirdie evo plusBirdie evo xplus