2.4.2 Identification label
The identification label contains the main product
information, including technical data.
Symbols
Serial number
Reference number
Manufacturer
Date of manufacture
Max. safe working load
Class II equipment
Type B applied part
WEEE conform
European Conformity
Medical device
Abbreviations for technical data:
•
Iin = Incoming Current
•
Uin = Incoming Voltage
•
Int. = Intermittence
For more information about technical data, see 11 Technical
Data, page 29.
2.4.3 Other Labels and Symbols
Read the user manual before using this product and follow
all instructions for safety and use.
1650023-F
•
AC = Alternating Current
•
Max = maximum
•
min = minute
Do not apply any side forces to the actuator (e.g. by
using it as a push bar) as this might result in damage and
malfunction.
Do not remove this label and manipulate the underlying
screw as this might impair the safety of the product.
The warranty of the product is voided if this label is
removed or broken.
XXX
hPa
Total weight of the product with the
maximum safe working load applied
Temperature limit
Humidity limitation
Atmospheric pressure limitation
Transport and storage conditions
Operation conditions
Always ensure that the sling is properly attached to the
hooks.
See 6.2.1 Attaching the sling to the lift, page 19.
Safety
XXX hPa
=
XXX kg
7