Environmental Conditions; Materials; Operating Forces Of Controls - Invacare Birdie EVO Manuel D'utilisation

Battery type
Manual emergency lowering
Electric emergency lowering / lifting
*IPx4 - The system is protected against water splashed from any direction.

11.4 Environmental conditions

Storage and
transportation
Temperature -10°C to +50°C
Relative humidity 20% to 90% at 30°C, not condensing
Atmospheric
pressure
Allow the product to reach operation temperature
before usage:
• Warming up from minimum storage temperature
might take more than 30 minutes.
• Cooling down from maximum storage
temperature might take more than 5 minutes.

11.5 Materials

Component
Base, legs, mast and boom
Spreader bar
1650023-B
Operation
+5°C to +40°C
800 hPa to 1060 hPa
Material
Steel, corrosion protected
powder coating
Steel, corrosion protected
powder coating and TPV
Birdie™ EVO
Birdie™ EVO
COMPACT
Lead acid (service free, sealed)
Yes
(at bottom of
(at top of actuator)
actuator)
Yes / Yes (for CBJ1
and CBJ Care) Yes / No (for CBJ2
Yes / No (for CBJ2 and CBJ Home)
and CBJ Home)
Component
Actuator housing, hand
control, mast protector,
castors and other plastic
parts
Boom connector, bolts and
nuts

11.6 Operating forces of controls

Control
Buttons on control unit
Buttons on hand control
Foot pedal with 100 mm castors*
Leg spreader lever with 100 mm
castors
Leg spreader lever with 75 mm
castors
* If equipped with 75 mm castors, a leg spreader lever is
mandatory.
Technical Data
Birdie™ EVO
PLUS
Yes
Optional
(at bottom of
actuator)
Yes / Yes (CBJ1 and
CBJ Care)
Material
Material according to
marking (PA, PP, PE)
Steel, corrosion protected
zinc-plating
Operating force
4 N
4 N
290 N
45 N
50 N
27