Installing The Wall Mount; Light Sensor - Becker Centronic TimeControl TC511 Notice De Montage Et D'utilisation

2) Learning additional transmitters
a) Press the learn button of the master transmitter until acknowledgement is
given by the receiver.
b) Now press the learn button of the new transmitter until acknowledgement is
given by the receiver
c) Then press the learn button of the new transmitter to be learnt once again.
The receiver will indicate when the learn process has been successfully com-
pleted.
The maximum radio range is up to 25 m indoors and up to 350 m in the open.
• Before installing in the position required, check that the transmitter and re-
ceiver are functioning properly.
• Fix the mount to the wall with the two screws provided.
Note
A light sensor can be connected to the device. See operating instruc-
tions for the Centronic SensorControl SC43 .
Installing the wall mount
Light sensor
Note
Ensure that the control is not in-
stalled and operated near metal
surfaces or magnetic fields.
Radio sets transmitting at the same
frequency can lead to interference
with the reception.
It is to be noted that the range of
the radio signal is restricted by leg-
islators and planning regulations.
de
en
fr
nl
37