Becker Centronic TimeControl TC511 Notice De Montage Et D'utilisation page 48

Assembly and Operating Instructions
PROGRAMME
PROG1/ ASTRO WEEK (Astro function for week + idle period st)
PROG1/ ASTRO BLOCK (Astro function for block1/2 + idle period st)
PROG1/ ASTRO INDIVIDUAL (Astro function for individual + idle period st)
1. Press the MENU button.
2. To select the PROGAMME menu, press the
+ button until PROGAMME appears.
3. Confirm by pressing OK. PROG1 appears.
4. Confirm by pressing OK.
5. Press the + button until the ASTRO menu appears.
6. Confirm by pressing OK.
7. Now select the PROG1 ASTRO function you require using the +/- buttons:
ASTRO week
Press OK for the WEEK menu level (1-7). All further entries now refer to every
day of the week.
ASTRO block
Press OK for the BLOCK menu level (BLOCK 1 1-5, BLOCK 2 6,7). All further
entries now refer to BLOCK 1 (1-5) and BLOCK 2 (6,7).
ASTRO individual
Press OK for the INDIVIDUAL menu level (1,2,3,4,5,6,7).
All further entries now refer to each individual day of the week.
8. Now set the IDLE PERIOD s and IDLE PERIOD t using the +/- buttons. Con-
firm each entry by pressing OK.
9. Press the MENU button to switch to operating mode.
48