What To Do If - Becker Centronic TimeControl TC511 Notice De Montage Et D'utilisation

Problem
Drive is not functioning,
transmission control
light is not lit.
Drive is not functioning,
transmission control
light is lit.
Astro programme does
not function according
to the switching times
The TC511 does not
carry out the switching
commands.
The TC511 does not
carry out the switching
commands precisely.
What to do if ...?
Cause
1. Batteries are dead.
2. Batteries are incor-
rectly inserted.
1. Receiver outside the
radio range.
2. Transmitter is not
programmed in the
receiver.
1. Date is incorrect.
2. Wrong city or wrong
latitude/longitude
set.
3. Holiday function is
switched on.
4. Astro shift is set.
The sliding switch is on
manual.
Holiday function is
switched on.
Remedy
1. Insert new batteries.
2. Insert batteries cor-
rectly.
1. Reduce distance to
the receiver.
2. Programme transmit-
ter.
1. Set correct date.
2. Set correct city
or exact degrees
latitude/longitude.
3. Switch holiday func-
tion off.
4. Adjust astro shift.
Move the sliding switch
to automatic.
Switch holiday function
off.
de
en
fr
nl
61