Becker Centronic TimeControl TC511 Notice De Montage Et D'utilisation page 56

Assembly and Operating Instructions
SETTING
GB ENGL/ ASTRO SHIFT st
(Language, astro shift)
Note
The TEST MODE menu level will only be displayed if a light sensor is
connected to the device.
1. You have confirmed the PROG2 END LIMIT menu level. TEST MODE ON/
OFF will appear.
You can activate or deactivate the TEST MODE (ON/OFF) using the +/- but-
2.
ton. Confirm by pressing OK. GB ENGL will appear.
Note
To exit from TEST MODE, press the OK button in operating mode.
You can set the language required using the +/- button.
3.
Confirm the language selected by pressing OK.
4.
5. ASTRO SHIFT s will appear.
You can set the required astro shift s (max. +/- 120 mins.) using the +/-
6.
button.
Confirm by pressing OK.
7.
8. ASTRO SHIFT t will appear.
You can set the required astro shift t (max. +/- 120 mins.) using the +/-
9.
button.
10. Confirm by pressing OK.
11. The function ASTRO SHIFT t has now been set.
12. Please read on for further programming options using the SETTING
menu.
56