Becker Centronic TimeControl TC511 Notice De Montage Et D'utilisation page 59

FUNCTION
ROLLER SHUTTER/BLIND FUNCTION, RUNNING TIME, INITIAL OPERA-
TION
(Selection of shutter/blind, running time of the roller shutter/blind, date of initial
operation)
Press the MENU button.
1.
2. To select the FUNCTION menu, press the + button until FUNCTION ap-
pears.
Confirm by pressing OK. ROLLER SHUTTER/BLIND will appear.
3.
You can select either roller or blind using the +/- button.
4.
Confirm by pressing OK. RUNNING TIME will appear.
5.
You can set the required running time using the +/- button.
6.
(Default setting: 120 seconds).
Confirm by pressing OK. EXPERT MODE OFF/ON will appear.
7.
You can select the required setting using the +/- button.
8.
Confirm your selection by pressing OK. INITIAL OPERATION will appear.
9.
10. Confirm by pressing OK.
de
en
fr
nl
59