Publicité
EN
FR
DE
ES
IT
STARTING THE GRASS SHEAR / SHRUBBER
See Figure 4.
Remove the blade sheath.
Press and hold the trigger lock button.
Release the trigger lock button and continue to squeeze
the trigger for extended operation.
STOPPING THE GRASS SHEAR / SHRUBBER
Release the trigger to stop the grass shear / shrubber.
Upon release of the trigger, the trigger lock button will
be automatically reset to the lock position.
REMOVING THE BLADE (GRASS SHEAR/SHRUBBER)
See Figures 6 - 7.
Remove battery pack from unit and place unit upside
down on a workbench
Slide the latch to the unlock position.
Slide the bottom cover back to remove.
Lift blade from blade post.
INSTALLING THE BLADE (GRASS SHEAR / SHRUBBER)
Remove battery pack from unit and place unit upside
down on a workbench.
Remove bottom cover.
Fit blade into blade post.
NOTE: When properly aligned, the blade assembly fits in
recessed slot in motor housing.
Re-install the cover.
Slide latch to the lock position.
OPERATING TIPS
Before starting your grass shear / shrubber, hold the unit
with the cutting blades directed away from you. Always
use the unit properly.
Keep from trimming too close to dirt, sand or gravel.
This can cause the blades to dull, reducing the cutting
efficiency.
Do not force the unit through dense growth. If the blades
slow down, reduce your pace.
If blades do become jammed, stop the motor, allow
the blades to stop and remove the battery pack before
attempting to remove the obstruction.
PT
NL
SV
DA
NO
FI
English (original instructions)
HU CS RU
RO PL
SL
HOLDING THE GRASS SHEAR / SHRUBBER
Dress properly to reduce the risk of injury when
operating this unit. Do not wear loose clothing or
jewelry. Always wear eye protection when in use.
Wear heavy, long pants, boots and well fitting gloves.
Do not wear short pants, sandals or go barefoot.
Hold the unit by the rear handle with the blade directed
away from you.
USING THE GRASS SHEAR
See Figure 5.
Use the grass shear for decorative trimming of grass
around trees, walkways, flower beds, etc.
With the blade parallel to the ground, start unit and trim
grass in a forward motion.
If blade jams on any electrical cord or line, DO
NOT TOUCH THE BLADE! IT CAN BECOME
ELECTRICALLY LIVE AND VERY DANGEROUS.
Continue to hold the grass shear / shrubber by the
insulated rear handle or lay it down and away from
you in a safe manner. Disconnect the electrical service
to the damaged line or cord before attempting to
free the blade from the line or cord. Failure to heed
this warning will result in serious personal injury or
possible death.
Clear the area to be cut before each use. Re-move all
objects such as cords, lights, wire, or string which can
become entangled in the cutting blade and create a
risk of serious personal injury.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various Types
of commercial solvents and may be damaged by their
use. Use a clean cloth to remove dirt, oil, grease, etc.
When servicing use only identical Ryobi replacement
parts. Use of any other parts can create a hazard or
cause product damage.
16
HR ET
LT
LV
SK BG
WARNING
DANGER
WARNING
WARNING
Publicité
