Publicité
EN
FR
DE
ES
IT
on.
Always ensure all the handles and guards are fitted
when using the tool.
Never attempt to use an incomplete machine or one
fitted with an unauthorised modification.
The vibration emission during actual use of the power
tool can differ from the declared total value depending
on the ways in which the tool is used.
It has been reported that vibrations from hand-held
tools may contribute to a condition called Raynaud's
Syndrome in certain individuals. Symptoms may include
tingling, numbness and blanching of the fingers, usually
apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking and work practices are all thought to contribute
to the development of these symptoms. It is presently
unknown what, if any, vibrations or extent of exposure
may contribute to the condition. There are measures
that can be taken by the operator to possibly reduce
the effects of vibration:
•
Keep your body warm in cold weather. When
operating the unit wear gloves to keep the hands
and wrists warm. It is reported that cold weather is
a major factor contributing to Raynaud's Syndrome.
•
After each period of operation, exercise to increase
blood circulation.
•
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and see your
physician about these symptoms.
WHILE OPERATING
To avoid accidental starting, never carry your unit with
your finger on the trigger.
Stay alert and pay attention to what you are doing. Use
common sense when using this grass shear / shrubber.
Wear heavy, long pants, substantial footwear and well
fitting gloves. Do not wear short pants, sandals or go
barefoot.
Ensure the switch is in the off position before inserting
battery pack. Inserting the battery pack into power tools
that have the switch on invites accidents.
Do not operate in poor lighting. Use the unit only in
daylight or good artificial light.
Do not overreach or stand on unstable support. Keep
good footing and balance at all times. Do not use on
ladder.
Do not force the grass shear / shrubber. It will do the
job better and with less likelihood of a risk of injury at
PT
NL
SV
DA
NO
FI
English (original instructions)
HU CS RU
RO PL
SL
the rate for which it was designed.
Release the trigger, allow the motor to stop, and remove
the battery pack before performing maintenance, repair,
or making adjustments.
Use grass shears for cutting grass and light weeds only.
Use shrubber for cutting hedges, bushes and shrubs
only.Do not use for any other purpose.
Before starting the unit, make sure the cutting blades
will not come in contact with anything. If you strike or
become entangled with foreign objects, stop the unit
immediately, remove the battery pack and check for
damage. Do not operate before repairing damage. Do
not operate the unit with loose or damaged parts.
Watch what you are doing. Use common sense.
Maintain grass shear / shrubber with care. Keep cutting
edge sharp and clean for best performance and to reduce
the risk of injury. Follow instructions for lubricating and
changing accessories. Keep handles dry, clean, and
free from oil and grease.
Check damaged parts. Before further use of the
grass shear / shrubber, a guard or other part that is
dam-aged should be carefully checked to determine
that it will operate properly and perform it's intended
function. Check for alignment of moving parts, binding
of moving parts, breakage of parts, mounting, and any
other condition that may affect it's operation. A guard or
other part that is damaged should be properly repaired
or replaced by a Authorised Service Centre unless
indicated elsewhere in this manual.
Risk of cut. Keep hands away from blades. Do not attempt
to remove cut material or hold material to be cut when
blades are moving. Make sure battery pack is removed
and the trigger is released when clearing jammed
material from blades. Do not grasp the exposed cutting
blades or cutting edges when picking up or holding the
unit.
Blades coast after unit is turned off.
Keep hands, face, and feet at a safe distance from
moving parts. Do not touch or try to stop the cutting
blades when they are moving.
Always stop the motor when cutting is delayed or when
walking from one cutting location to another.
Keep unit clean of grass clippings and other materials.
They may become lodged in the cutting blades.
Store the unit inside in a dry place, either locked up or
up high to prevent unauthorised use or damage. Keep
out of the reach of children or untrained individuals.
Replace blade cover when unit is not in use.
12
HR ET
LT
LV
SK BG
CAUTION
Publicité
