Loading Cutlery And Dishes - ZANKER KDI 10000 Notice D'utilisation

Loading cutlery and dishes

Hints and tips
• Do not put in the appliance items that can absorb
water (sponges, household cloths).
• Remove the remaining food from the items.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the
opening down.
• Make sure that water does not collect in containers
or in bowls.
• Make sure that cutlery and dishes do not bond to-
gether.
• Make sure that the glasses do not touch other
glasses.
• Put small items in the cutlery basket.
• Mix the spoons with other cutlery to prevent them to
bond together.
• When you put the items in the baskets, make sure
that the water can touch all surfaces.
• Put light items in the upper basket. Make sure that
the items do not move.
• Water droplets can collect on plastic items and non-
stick pans.
1
Arrange the service
dishes and large lids
around the edge of the
basket.
2
1
Use the cutlery grid. If the dimensions of the cut-
lery prevent use of the cutlery grid, you can easily
remove it.
1
Arrange the items to let
water touch all surfaces.
Prevent to put plates in the first three sectors in
the front part of the basket. Make sure the plates
tilt forward.
Adjustment of the height of the upper basket
You can put the upper basket in two positions to in-
crease the load flexibility.
Maximum height of the dishes in :
the upper bas-
Higher position
Lower position
2
2
For longer items, fold the
cup racks up.
the lower bas-
ket ket
20 cm 31 cm
24 cm 27 cm
23