Important; Hints And Tips - ZANKER KDT10001FB Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Press the programme button again and again until
only the indicator of the programme you want to
set is on.
4. Close the appliance door. The programme starts.
Opening the door while the appliance operates
If you open the door, the appliance stops. When you
close the door, the appliance continues from the point
of interruption.
Cancelling the programme
Do the Reset function.
Make sure that there is detergent in the deter-
gent dispenser before you start a new pro-
gramme.
At the end of the programme
The end indicator comes on.

Hints and tips

The water softener
Hard water contains a high quantity of minerals that
can cause damage to the appliance and bad washing
results. The water softener neutralises these minerals.
The dishwasher salt keeps the water softener clean
and in good conditions. It is important to set the right
level of the water softener. This makes sure that the
water softener uses the correct quantity of dishwasher
salt and water.
Using salt, rinse aid and detergent
• Only use salt, rinse aid and detergent for dishwash-
er. Other products can cause damage to the appli-
ance.
• The rinse aid helps, during the last rinsing phase, to
dry the dishes without streaks and stains.
• Combi detergent tablets contain detergent, rinse aid
and other added agents. Be sure that these tablets
are applicable to the water hardness in your area.
Refer to the instructions on the packaging of the
products.
• Detergent tablets do not fully dissolve with short
programmes. To prevent detergent residues on the
tableware, we recommend that you use the tablets
with long programmes.
20
1. Press the on/off button to deactivate the appli-
ance.
2. Close the water tap.
If you do not press the on/off button, the AUTO
OFF function automatically deactivates the appli-
ance a few minutes after the end of the programme.
This helps to decrease the energy consumption,

Important

• Let the dishes become cold before you remove
them from the appliance. Hot dishes can be easily
damaged.
• First remove the items from the lower basket, then
from the upper basket.
• There can be water on the sides and on the door of
the appliance. Stainless steel becomes cool more
quickly than the dishes.
Do not use more than the correct quantity of de-
tergent. Refer to the instructions on the deter-
gent packaging.
Loading the baskets
Refer to the supplied leaflet with examples of the
load of the baskets.
• Only use the appliance to wash items that are dish-
washer-safe.
• Do not put in the appliance items made of wood,
horn, aluminium, pewter and copper.
• Do not put in the appliance items that can absorb
water (sponges, household cloths).
• Remove remaining food from the items.
• To remove easily remaining burned food, soak pots
and pans in water before you put them in the appli-
ance.
• Put hollow items (cups, glasses and pans) with the
opening down.
• Make sure that cutlery and dishes do not bond to-
gether. Mix spoons with other cutlery.
• Make sure that glasses do not touch other glasses.
• Put the small items in the cutlery basket.
• Put the light items in the upper basket. Make sure
that they do not move.

Publicité

Table des Matières
loading

Table des Matières