Hints And Tips - ZANKER KDI10000XK Notice D'utilisation

3. Turn the programme knob until the programme
marker is aligned with the programme you want to
set.
• The on/off indicator comes on.
• The phase indicators of the set programme start
to flash.
4. Press the start button. The programme starts.
• The start indicator comes on.
• Only the indicator of the phase in operation
stays on.
Opening the door while the appliance operates
If you open the door, the appliance stops. When you
close the door, the appliance continues from the point
of interruption.
Cancelling the programme
Press and hold the start button until the start indicator
goes off and the phase indicators for the programme
start to flash.
Make sure that there is detergent in the detergent
dispenser before you start a new programme.

Hints and tips

The water softener
Hard water contains a high quantity of minerals that can
cause damage to the appliance and bad washing re-
sults. The water softener neutralises these minerals.
The dishwasher salt keeps the water softener clean
and in good conditions. It is important to set the right
level of the water softener. This makes sure that the
water softener uses the correct quantity of dishwasher
salt and water.
Using salt, rinse aid and detergent
• Only use salt, rinse aid and detergent for dishwash-
er. Other products can cause damage to the appli-
ance.
• The rinse aid helps, during the last rinsing phase, to
dry the dishes without streaks and stains.
• Combi detergent tablets contain detergent, rinse aid
and other added agents. Be sure that these tablets
are applicable to the water hardness in your area.
Refer to the instructions on the packaging of the
products.
• Detergent tablets do not fully dissolve with short pro-
grammes. To prevent detergent residues on the ta-
At the end of the programme
When the programme is completed, the end indicator
comes on.
If you do not deactivate the appliance within 3 minutes,
only the on/off indicator stays on. This helps to de-
crease energy consumption.
1. Deactivate the appliance. Turn the programme
knob until the programme marker is aligned with
the on/off indicator.
2. Close the water tap.
• Let the dishes become cold before you remove
them from the appliance. Hot dishes can be
easily damaged.
• First remove the items from the lower basket,
then from the upper basket.
• There can be water on the sides and on the
door of the appliance. Stainless steel becomes
cool more quickly than the dishes.
bleware, we recommend that you use the tablets
with long programmes.
Do not use more than the correct quantity of de-
tergent. Refer to the instructions on the detergent
packaging.
Loading the baskets
Refer to the supplied leaflet with examples of the
load of the baskets.
• Only use the appliance to wash items that are dish-
washer-safe.
• Do not put in the appliance items made of wood,
horn, aluminium, pewter and copper.
• Do not put in the appliance items that can absorb
water (sponges, household cloths).
• Remove remaining food from the items.
• To remove easily remaining burned food, soak pots
and pans in water before you put them in the appli-
ance.
• Put hollow items (cups, glasses and pans) with the
opening down.
21