Programmes; Before First Use - ZANKER KDI10000XK Notice D'utilisation

Programmes

1)
Programme
A
B
2)
C
3)
D
4)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can
change the programme duration and the consumption values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal
soil. (This is the standard programme for test institutes).
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to
come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

Before first use

1. Make sure that the set level of the water softener
agrees with the water hardness in your area. If not,
adjust the water softener. Contact your local water
authority to know the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
Degree of soil
Type of load
Normal soil
Crockery and cutlery
Fresh soil
Crockery and cutlery
Normal soil
Crockery and cutlery
All
Programme
phases
Prewash
Wash 65 °C
Rinses
Dry
Wash 65 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Prewash
4. Open the water tap.
5. Processing residues can stay in the appliance.
Start a programme to remove them. Do not use de-
tergent and do not load the baskets.
Duration Energy
(min) (kWh)
100 - 110 1.4 - 1.6
30 0.9
130 - 140 1.0 - 1.2
12 0.1
Water
(l)
19 - 21
9
14 - 16
5
17