Programmes; Before First Use - ZANKER KDI10001XB Notice D'utilisation

Indicators

Programmes

Degree of soil
1)
Programme
Type of load
Normal soil
Crockery and cut-
lery
Fresh soil
2)
Crockery and cut-
lery
Normal soil
Crockery and cut-
3)
lery
1) The pressure and the temperature of the water , the variations of the mains supply, the options and the quantity of dishes
can change the values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal
soil. (This is the standard programme for test institutes).
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

Before first use

1. Make sure that the set level of the water softener
agrees with the water hardness in your area. If
not, adjust the water softener. Contact your local
water authority to know the water hardness in your
area.
2. Fill the salt container.
Washing phase indicator.
Drying phase indicator.
End indicator.
Salt indicator. This indicator is off while the programme operates.
Programme
phases
Prewash
Wash 65 °C
Rinses
Dry
Wash 65 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the appliance.
Start a programme to remove them. Do not use
detergent and do not load the baskets.
Description
Duration Energy
(min) (kWh)
100 - 110 1.2 - 1.6
30 0.8
195 1.02
Water
(l)
15 - 16
9
11
15