Washing Programmes - ZANKER KDI 10000 Notice D'utilisation

1) When the salt container is empty, the related indicator does not come on while a washing programme operates.
Start/cancel button
Use this button for these operations:
• To start the washing programme. Refer to 'Select
and start a washing programme'.
• To cancel a washing programme in progress. Refer
to 'Select and start a washing programme'.
• To adjust electronically the level of the water soften-
er. Refer to 'Setting the water softener'.

Washing programmes

Programme
1)
2)
1) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
2) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy
consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.
Consumption values
Programme
Salt indicator. It comes on when it is necessary to fill the salt container.
1)
After you fill the container, the salt indicator can stay on for some hours. This does not
have an unwanted effect on the operation of the appliance.
Type of soil
Normal soil
Fresh soil
Normal soil
Programme time (minute)
100-110
30
130-140
Indicators
Programme knob and on/off indicator
To activate the appliance and set a washing
programme
• Align the programme marker that is on the knob with
a washing programme. Refer to 'Washing pro-
grammes'. The on/off indicator comes on.
To deactivate the appliance
• Align the programme marker with the on/off indica-
tor. The on/off indicator goes off.
Type of load
Crockery and cutlery
Crockery and cutlery
Crockery and cutlery
Energy (kWh)
1,4-1,6
0,9
1,0-1,2
Programme description
Prewash
Wash 65 °C
Rinses
Dry
Wash 65 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Water (litre)
19-21
9
14-16
19