Washer Installation (Maximus Mvx) - Videotec WASEX2T4AT Manuel D'instructions

6.5 Washer installation
(MAXIMUS MVX)
Fasten the bracket (01) onto the body of the
MAXIMUS MVX with the metal clip (02) provided.
Fasten the support for the delivery pipe (03) by
means of the screws and washers provided.
02
01
03
Fig. 33
Unscrew the nozzle (04) from the delivery pipe.
Insert the nozzle (04) through the hole in the support
bracket (03) and secure with the nut (05) and washer
provided.
04
05
Fig. 34
Screw the delivery pipe (06) to the nozzle fixed to the
bracket.
MNVCWASEX_2013_EN
06
Fig. 35
Shorten the washer pipe (06) as needed. Unscrew the
nut (07) and slide it along the pipe. Insert the end of
the pipe into the spinner (08).
Fig. 36
Lock the nut to the coupling.
Fig. 37
Connect the supply pipe (09).
06
Fig. 38
To start the wash system refer to the MAXIMUS MVX
manual.
08
07
06
09
17