Preparing The Product For Use; Safety Precautions Before Use; Unpacking - Videotec WASEX2T4AT Manuel D'instructions

5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.

5.1 Safety precautions before use

Never exceed performance specifications.
Make all connections in a non-explosive
atmosphere.
Before starting any operation, make sure
the power supply is disconnected.
Make connections and tests in the
laboratory before carrying out installation
on site. Use appropriate tools for the
purpose.
8

5.2 Unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
Unscrew the 2 side screws to open the
cover.
Fig. 5
5.3 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Windows washing kit
• Support for the delivery pipe
• Locking bracket of the delivery pipe
• Bolts and screws
• Washer semi-rigid pipe (with nozzle)
• Pipe connector
• Stainless steel clamps
• Delivery pipe (length: 20m)
• Sealing rings
• Instruction manual
• Solenoid valve user and installation manual
MNVCWASEX_2013_EN