Washer Installation (Maximus-Mhx) - Videotec WASEX2T4AT Manuel D'instructions

6.6 Washer installation
(MAXIMUS-MHX)
Fasten the bracket (01) onto the body of the
MAXIMUS-MHX with the metal clip (02) provided.
Fasten the support for the delivery pipe (03) by
means of the screws and washers provided.
02
01
03
Fig. 39
Unscrew the nozzle (04) from the delivery pipe.
Insert the nozzle (04) through the hole in the support
bracket (03) and secure with the nut (05) and washer
provided.
04
05
Fig. 40
Screw the delivery pipe (06) to the nozzle fixed to the
bracket.
18
06
Fig. 41
Shorten the washer pipe (06) as needed. Unscrew the
nut (07) and slide it along the pipe. Insert the end of
the pipe into the spinner (08).
Fig. 42
Lock the nut to the coupling.
Fig. 43
Connect the supply pipe (09).
06
Fig. 44
To start the wash system refer to the MAXIMUS-MHX
manual.
08
07
06
09
MNVCWASEX_2013_EN