Connection To Maximus-Mhx - Videotec WASEX2T4AT Manuel D'instructions

6.2.4 Connection to MAXIMUS-MHX

To install electrical connections between
the products, use the communication box
by VIDEOTEC, MAXIMUS MBX or MAXIMUS
MBA, alternatively use an explosion-
proof junction box with equivalent
characteristics.
The relays are usable with the specifications
described below. Working voltage: up
to 30Vac or 60Vdc. Current: 1A max. Use
suitable cable sections with the following
characteristics: from 0.25mm² (23AWG) up
to 1.5mm² (15AWG).
All signal cables must be grouped together
by means of a cable tie.
Safety
transformer
power supply
Explosion-proof
junction box
Fig. 16
Use an internal relay to connect to the MAXIMUS-
MHX, if necessary (consult the product manual).
MNVCWASEX_2013_EN
Solenoid valve
Solenoid valve
Connect the solenoid valve with the following
operations:
• Open the cover of the solenoid valve.
• Identify the terminals L, N.
• Connect as in the diagram below (Fig. 17, page 13).
Fig. 17
A
13