System Settings In Radio Mode (Dab/Fm); Setting The Date/Time - Medion LIFE P66120 Notice D'utilisation

11. System settings in radio mode (DAB/FM)

11.1. Setting the date/time

The device is equipped with the Radio Data System that sets the time and date
automatically.
The data is synchronised after the device has been connected to the power sup-
ply. During this process, 00:00 01-01-2018 is first shown on the display.
The current data will appear once the process is completed.
In some cases, the data cannot be synchronised if the radio signal is too weak.
In this case, 00:00 01-01-2018 is shown on the display and the data must
be set manually.
 In radio mode, press and hold the MENU button until SET MENU appears
on the display with the TIME/DATE submenu.
 Press the ENTER button to navigate to the TIME/DATE menu.
SET TIME
− Use the  or  buttons to set the hour (HOUR) and confirm with EN-
TER.
− Use the  or  buttons to set the minute (MIN) and confirm with EN-
TER.
− Use the  or  buttons to set the year (YEAR) and confirm with EN-
TER.
− Use the  or  buttons to set the month (MONTH) and confirm with
ENTER.
− Use the  or  buttons to set the day (DATE) and confirm with ENTER.
After this you will then automatically exit the SET MENU menu.
If you switch off the device with the ON/OFF switch (or also in the
event of a power failure), the time set previously will be lost. After
switching on the device again, the time is synchronised again auto-
matically. If you exit the current operating mode after the manual
time setting and select this again, the time setting will also synchro-
nise again automatically and the settings made previously will also
be lost.
DE
FR
NL
IT
ES
EN
175