Edwards QSB63 Mode D'emploi page 2

We, Edwards,
Manor Royal, Crawley, West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the technical file, that the machine(s)
QSBP Pneumatic Quarter Swing Butterfly Valves
B404-03-000
B426-03-000
to which this declaration relates is intended to be incorporated into other equipment and not to function independently. The machine(s) must not be put into service
until the equipment into which it is incorporated has been brought into conformity with the provisions of the Machinery Directive, 2006/42/EC.
The machine(s) is in conformity with the following standard(s) or other normative document(s)
None applicable
The relevant essential requirements of the Machinery Directive 2006/42/EC Annex 1 have been applied and fulfilled so far as practicable for this partly completed
machinery. The relevant technical documentation has been compiled in accordance with Annex VII Part B. In response to a reasoned request by the national
authorities, Edwards Ltd undertakes to provide relevant information on the partly completed machinery (via email).
Note: This declaration covers all product serial numbers from the date this Declaration was signed onwards.
Mr L Marini, Technical Manager
Declaration of Incorporation
B428-01-000
B430-03-000
This product has been manufactured under a quality system registered to ISO9001
9 December 2009
Date and Place