Warranty / Service - Beurer BC 58 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
Permissible storage
- 20 °C to + 55 °C, ≤ 95 % relative air
conditions
humidity, 800 –1050 hPa ambient pres-
sure
Power supply
2 x 1,5 V
Battery life
For approx. 300 measurements,
depending on the blood pressure level
and/or pump pressure
Classification
Internal supply, IPX0, no AP or APG,
continuous operation, type BF applied
part
The serial number is located on the device or in the battery
compartment.
Technical information is subject to change without notifica-
tion to allow for updates.
• This unit is in line with European Standard EN 60601-1-2
(In accordance with CISPR 11, IEC 61000-4-2,
IEC 61000-4-3, IEC 61000-4-6 and IEC 61000-4-8) and
is subject to particular precautions with regard to electro-
magnetic compatibility (EMC). Please note that portable
and mobile HF communication systems may interfere with
this unit.
• This device is in line with the EU Medical Devices Direc-
tive 93/42/EEC, the "Medizinproduktegesetz" (Ger-
man Medical Devices Act) and the standards EN 1060-1
AAA batteries
29
(non-invasive sphygmomanometers, Part 1: General
requirements), EN 1060-3 (non-invasive sphygmoma-
nometers, Part 3: Supplementary requirements for elec-
tro-mechanical blood pressure measuring systems)
and IEC 80601-2-30 (Medical electrical equipment –
Part 2 – 30: Particular requirements for the safety and
essential performance of automated non-invasive blood
pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical pur-
poses, it must be regularly tested for accuracy by appro-
priate means. Precise instructions for checking accuracy
may be requested from the service address.

12. Warranty / service

In case of a claim under the warranty please contact your
local dealer or the local representation which is mentioned
in the list "service international".
In case of returning the unit please add a copy of your
receipt and a short report of the defect.
The following warranty terms shall apply:
1. The warranty period for BEURER products is either 5
years or- if longer- the country specific warranty period
from date of Purchase.

Publicité

Table des Matières
loading

Table des Matières