Settings Menu; Prh = Warm-Up; Dt. = Delta T; Current Time Adjustment - Piron MARCO POLO PF1004 Mode D'emploi

SETTINGS MENU

Allows you to change the oven functions to suit your requirements.
The oven must be off before you can access this menu.
P/M
Touch the key and keep it pressed until the P/M indicator comes on
with a GREEN light.
+ –
Touch key or to scroll the menu items.
PrH
Dt.
C.
t.
U.
Stop at the item required.

PrH = Warm-up

Factory parameters = 1 ( Function enabled )
When the function (1) is enabled, the temperature in the oven will increase 30°C more that the cooking
temperature setting.
P/M
Touch the key to select 1 or 0:
PrH 1 = Cooking chamber warm-up function ENABLED.
NOTE. The "C. Start Postponed" function is inhibited, by mutual exclusion. ( C. = 0)
PrH 0 = Cooking chamber warm-up function NOT ENABLED.
Note. Maximum warm-up temperature 270°C for 5 minutes.

dt. = Delta T

Factory parameters = 0 ( Function disabled )
Touch the P/M key to select 1 or 0:
dt. 1 = Delta T function ENABLED. Touch key
30°C (86°F) and maximum 99°C (210°F)) in the TEMPERATURE (D) sector
Dt. 0 = Delta T function NOT ENABLED.
WARM-UP
Delta T
WARM-UP

Current time adjustment

°C / °F selection (Celsius
/
Fahrenheit )
+ –
or to enter the required value
E n g l i s h | 54
(Zone D)
(from minimum