Oven Washing - Piron MARCO POLO PF1004 Mode D'emploi

Oven washing

NOTE. washing programs are only available if the washing kit has
been installed in your oven. Ask your dealer for further information.
Use of the washing system allows the cooking chamber to be efficiently
and automatically washed.
Turn on the oven with the ON/OFF key.
Touch the P/M key until the P/M indicator comes on with a RED light.
Scroll the menu items.
.....
P3
P2
P1....
L6
L5
L4
L3
L2
L1
• Touch the
-
key to scroll the washing programs (L6, L5, L4, L3, L2, L1).
• Touch the
+
key to go back 1 or more positions.
Touch the P/M key to quit this menu.
DESCRIPTION of the WASHING programs
L6 RINSING AGENT tube PREFILLING program. This operation must be done when the oven is
installed for the first time or afterwards, when the rinsing agent holder has been replaced.
L5 DETERGENT tube PREFILLING program. This operation must be done when the oven is installed
for the first time or afterwards, when the detergent holder has been replaced.
Note. Washing programs L6 and L5 include a brief rinsing cycle with water alone, so as to ensure that
the cooking chamber is perfectly free from chemical products.
L4 Rinsing. Brief automatic program lasting 5 min, to clean the cooking chamber or cool it.
L3 LONG wash
L2 MEDIUM wash
L1 SHORT wash
Make sure that the door is closed and then touch the START/STOP key to start the required program.
NOTE. If a blackout occurs when one of the programs described in this chapter is in progress, error
message Er14 will appear when the electricity supply is restored.
No cooking operation is allowed, except for:
1. Performing a washing program.
2. Activating the rinsing cycle.
lasts 1 h.
lasts 50 min.
lasts 45 min.
E n g l i s h | 53
(Zone D)