Introduction; Installation Instructions; Warnings; Preliminary Operations - Piron MARCO POLO PF1004 Mode D'emploi

INTRODUCTION

Dear Customer. We would like to thank you for purchasing this product and congratulate you for
making an excellent choice. We hope this will be the start of a positive and lasting relationship.
This booklet contains all of the information needed for the correct use, maintenance and installation
of the equipment. This manual has been created to enable the installation engineer and above all
the end user to take every action and precaution needed to ensure safe, long- lasting and efficient
use of the equipment.
This booklet must be carefully conserved for the equipment's entire life cycle so that it remains
available for future reference for operators and specialised technical personnel. Replacement
documentation should be requested from the manufacturer or dealer in the event of loss or damage.
The manufacturer shall not be held liable for damage to people or things deriving from improper
use of the equipment, changes or repairs carried out by unauthorised personnel and the use of
spare parts that are not original or specifically designed for the model concerned.
This equipment complies with EU directives in force.

INSTALLATION INSTRUCTIONS

WARNINGS

Read this manual carefully before installing and commissioning this device.
All non-routine installation, assembly, servicing and maintenance work must be performed by
qualified personnel equipped with the necessary professional requirements (authorised by the
manufacturer or dealer), in compliance with the regulations in force in the country of installation
and those concerning product safety and safety in the workplace.
Incorrect installation, servicing, maintenance and cleaning and any tampering with or modifications to the
equipment may cause malfunction, damage or injuries.
The equipment must only be used to cook or heat food in the context of industrial kitchens. Any other use
is considered improper and therefore hazardous.

PRELIMINARY OPERATIONS

On receipt of the oven, make sure that it has not been damaged in transit and that the packaging has not
been tampered with. In the event of damage or missing parts please notify the carrier and
manufacturer/dealer immediately specifying the Article (ART) and serial number (Ser No) and attaching
photographic evidence.
WARNING: the oven may be at risk of tipping over during transit and consequently there may be a risk of
breakages and damage caused to people and things. Use suitable means taking into account the weight of
the equipment. Do not drag or tilt the oven for any reason; lift it off the ground, keeping it straight and move
it horizontally.
E n g l i s h | 33