Basic Safety Information - Burkert S020 Manuel Utilisateur

Basicsafetyinformation
3 . b A S i c S A F e T y
i n F o R m AT i o n
This safety information does not take into account:
• any contingencies or occurences that may arise during installation,
use and maintenance of the devices.
• the local safety regulations that the operator must ensure the staff
in charge of installation and maintenance observe.
danger due to high pressure in the installation.
danger due to high temperatures of the fluid.
danger due to the nature of the fluid.
Type S020
English
Various dangerous situations
To avoid injury take care to:
• prevent any power supply switch-on.
• ensure that installation and maintenance work are carried out by
qualified, authorised personnel in possession of the appropriate
tools.
• guarantee a set or controlled restarting of the process, after a
power supply interruption.
• use the fitting only if in perfect working order and in compliance
with the instructions provided in the user manual.
• observe the general technical rules when installing and using the
fitting.
noTe
chemical compatibility of materials in contact with the fluid.
• Systematically check the chemical compatibility of the component
materials of the fitting and the products likely to come into con-
tact with it (for example: alcohols, strong or concentrated acids,
aldehydes, alkaline compounds, esters, aliphatic compounds,
ketones, halogenated aromatics or hydrocarbons, oxidants and
chlorinated agents).
7