Intended Use; Basic Safety Information - Burkert 8200 Manuel D'utilisation

Intended use

2. INTENDED USE
Use of the hygienic holder that does not comply with the
instructions could present risks to people, nearby installa-
tions and the environment.
- The 8200 hygienic holder is intended for professional use in
process measurements technology, as a holder for probe
with a 12 mm shaft diameter.
- Use the holder in compliance with the specifications and
conditions of commissioning and use given in the contrac-
tual documents, in these operating instructions and in the
operating instructions for the device which is inserted into
the holder.
- Safe and trouble-free operation of the holder depends on its
proper transport, storage and installation, as well as careful
operation and maintenance.
- Only use the holder as intended.
→
Observe any existing restraints when the holder is exported.
Type 8200
3.

BASIC SAFETY INFORMATION

This safety information does not take into account:
• any contingencies or occurences that may arise during instal-
lation, use and maintenance of the devices.
• the local safety regulations for which the operating company
is responsible including the staff in charge of installation and
maintenance.
Danger due to high pressure in the installation.
Danger due to high temperatures of the fluid.
Danger due to the nature of the fluid.
Various dangerous situations
To avoid injury take care:
- Prevent any unintentional power supply switch-on.
- To ensure that installation and maintenance work are
carried out by qualified, authorised personnel in possession
of the appropriate tools.
- Use the holder only if in perfect working order and in compliance
with the instructions provided in the operating instructions.
- To replace defective parts immediately.
- Observe the general technical rules when installing and using
the holder.
- Not to fix, assemble or maintain the holder in explosive
atmospheres.
English
5