General Information; Contact Addresses; Warranty; Information On The Internet - Burkert 2030 Manuel D'utilisation

Type 2030, 2031, 2031 K, 2032,
2033, 2037

General Information

4. GENERAL INFORMATION
4.1. Contact Addresses
Germany
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
International
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet at: www.burkert.com

4.2. Warranty

The warranty is only valid if the device is used as intended in accordance
with the specified application conditions.
4.3. Information on the Internet
The operating instructions and data sheets for Types 2030, 2031, 2031
K, 2032, 2033 and 2037 can be found on the Internet at:
www.buerkert.com
5. SYSTEM DESCRIPTION
5.1. General Description
The Types 2030, 2031, 2031 K, 2032, 2033 and 2037 are an externally
controlled diaphragm valve with piston drive and diaphragm seal. The
valve is self-draining in the appropriate installation position.
5.2. Intended Application Area
The diaphragm valve of Type 2030 is designed for the control of
contaminated and aggressive media. The valves of Type 2031,
2031 K, 2032, 2033 and 2037 can be used even for ultra-pure or
sterile media with a higher viscosity. The valves may only control
media which do not attack the housing and seal materials (see rating
plate). Information on the resistance of materials to the media is
available from your Bürkert sales office.

5.3. Conformity

Type 2030, 2031, 2031 K, 2032, 2033 and 2037 conforms with the
EC Directives according to the EC Declaration of Conformity.

5.4. Standards

The applied standards, which verify conformity with the EC Direc-
tives, can be found on the EC-Type Examination Certificate and / or
the EC Declaration of Conformity.
english
7