Authorized Use; Restrictions - Burkert 2030 Manuel D'utilisation

Type 2030, 2031, 2031 K, 2032,
2033, 2037

Authorized Use

2. AUTHORIZED USE
Non-authorized use of the devices may be dangerous to
people, nearby equipment and the environment.
• The diaphragm valves of Types 2030, 2031, 2031 K, 2032, 2033
and 2037 are designed for the control of contaminated, ultra-pure
or sterile media, as well as for abrasive or aggressive media (also
with higher viscosity).
• The devices may be used only for media which do not attack
the housing and seal materials (see rating plate). Informa-
tion on the resistance of materials to the media is avail-
able from your Bürkert sales office or on the Internet at
www.burkert.com Documentation
Chemical Resistance Chart.
• During use observe the authorized data, the operating condi-
tions and conditions of use specified in the contract documents
and operating instructions. These are described in the chapter
„5. System Description" and „6. Technical Data".
• The device may be used only in conjunction with third-party
devices and components recommended and authorized by
Bürkert.
• Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and fault-
less operation.
• Use the device only as intended.
Brochures & Catalogues

2.1. Restrictions

If exporting the system/device, observe any existing restrictions.
2.1.1. E xplosion Protection Approval
The explosion protection approval is only valid if you use the
modules and components authorized by Bürkert, as described in
these operating instructions.
If you make unauthorized changes to the system, the modules or
components, the explosion protection approval will also be terminated.
english
5