Commissioning; Safety Instructions; Maintenance And Troubleshooting - Burkert S020 Manuel Utilisateur

Commissioning

8. commiSSioninG
8.1.

Safety instructions

Warning
danger due to non-conforming commissioning.
Non conforming commissioning may lead to injuries and damage
the fitting and its surroundings.
• Before commissioning, make sure that the staff in charge have
read and fully understood the contents of the manual.
• In particular, observe the safety recommendations and intended
use.
• The installation must only be commissioned by suitably trained
staff.
Type S020
English
9. mAinTenAnce And
TRoubleShooTinG
9.1. Safety instructions
danger
Risk of injury due to high pressure in the installation.
• Stop the circulation of fluid and release the pressure before
loosening the fitting.
Risk of injury due to high fluid temperatures.
• Use safety gloves to handle the fitting.
• Stop the circulation of fluid and bleed the pipe before loosening
the fitting.
• Keep all easily flammable fluid away from the fitting.
Risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and safety
relating to the use of aggressive fluids.
Warning
Risk of injury due to non-conforming maintenance.
• Maintenance must only be carried out by qualified and skilled staff
with the appropriate tools.
• Ensure that the restart of the installation is controlled after any
interventions.
33